Small Cabinets Series QLP-EX

SERIES QLP – EX

SMALL CABINETS SERIES QLP

• Material: EN 1.4301 (TYPE 304L) s/s, scotch brite, satin-finish and protected on one side
• Enclosure obtained from a single sheet, shaped by multi-bending of the enclosure front edge
• Fairlead not provided
• Single full door, reversible
• Door Locks: twin-comb mapping, standardized type Ø 3 for Low Tension, s/s outside parts
• S/s inner hinges: 120° opening as per CEI EN 60204-1 recommendations
• Maximum weight admitted on the door: 12 kg
•    Seal made of foamed polyurethane or silicone foam.
• The enclosure can be used at  the following Maximum Temperatures on the outer surface:
• -20°C to + 60°C with seal of bi-component foamed polyurethane
• -40°C to + 180°C with seal of bi-component silicone foam
• Inner plate: EN 10142 sendzimir galvanized sheet execution, secured to the bottom of the enclosure by M8 threaded pins delivered with the enclosure.
• Prearranged for earthing in compliance with the applicable regulations in force
• Drillings, if any, to comply with the parameters indicated in the instruction manual
• Protection degree: IP66 (CEI EN 60529)
* Certificates for areas 1- 2- 21- 22

NOTE: The sketch of these cabinets are unique and therefore apply to the whole series QLP-EX

ITEMS QLP812 with 3 locks

Catalogue of Atex Line   DOWNLOAD